yz400f kickstand hardware

2 replies to this topic
  • smitty300ex

Posted January 18, 2008 - 05:38 PM


I have a 1999 YZ400F with an aftermarket kickstand that was installed before I bought it. It is not a clamp-on, it is the type where you drill through the front side of the swingarm and insert threads of somekind for the bolts to thread in. The problem is that one of the threaded inserts rattled loose and fell into the swingarm or on the trail. I don't know what to use to replace it. Any info will be appreciated.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • DeeCee

Posted January 18, 2008 - 06:06 PM


I have recently fitted a Trailtech (see www.trailtech.net) kickstand onto my 400. Bolts onto existing bolting points.

  • Birdy426

Posted January 18, 2008 - 09:02 PM


Most hardware stores that have a wide selection of hardware carry something called a "Riv-Nut" It's what was originally installed there

Related Content


Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  94 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.