Found a great place to mount high/lo switch

No replies to this topic
  • Pooley

Posted April 10, 2002 - 03:51 PM


While adding all the required wires for my DOT inspection, the biggest problem was where to put the 3 position switch. The switch I got was a standard single pole, double throw toggle switch from Baja Designs. I thought I would have to fabricate a mount but the WR has one available that works great...the upside down odometer bracket. Since I had already installed the Panoram and removed the odometer it was a great spot, except its a little tight to access the switch but who cares. Hope this is useful for someone.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.