The list XR650L


25 replies to this topic
  • martinfan30

Posted January 17, 2008 - 07:56 AM

#21

I remember that thread. Must be a killer L! I really need to do the suspension work front/rear. Cost wise?

  • ovationdave

Posted January 17, 2008 - 08:47 AM

#22

I remember that thread. Must be a killer L! I really need to do the suspension work front/rear. Cost wise?

I am looking at buying a XRL pig in the next few weeks, only trouble is I am putting a pig on it too! I am 6'5" and #290, and after getting a couple of quotes for the suspension work, I have two answers. I have had one guy tell me I need springs and a re-valve, and two guys telling me I just need to re-spring, and change the oil viscosity in the front, and that should do it. To do ONLY the springs, its going to run about $250, spring AND re-valve, double that. Thats for fronts & rears both. Keep in mind that I told them I wanted to ride about 30% paved, 50$ dirt roads/firetrails/2-tracks, and 20% trails.

Dave

  • rontheman13

Posted January 17, 2008 - 09:03 AM

#23

XRL's are seriously addictive. Congrats on your new ride. I picked up my '94 because I got a good deal on it, not really sure why I wanted it at the time since I have a good street bike and good dirt bikes. Now it's the one bike I'd keep if I had to get rid of everything else. I commute to work with it, off road it, and used it to pre-run for the Baja 1000 this year.

If you're really serious about taking it off road and riding it hard, I've been super happy with the work Precision Concepts did on the suspension on mine. They revalved and put in heavier springs in the forks. The shock spring was fine for me (200 pounds with gear). Makes it a better bike on the street too.

I've run Dunlop 606's and thought they were good for a full knobby on the street. The rear works good on the dirt. I thought the front pushed a little more than I thought it should so I'm going to keep trying different fronts.

Pull the smog stuff off, put in a UNI air filter, a slip on silencer, and do Dave's mods. I went with an FMF Q and have been really happy with it. Not too loud.

Here's a link with all the stuff I did to mine. I feel like I ended up with a pretty well sorted bike. There was definitely some trial and error getting it there.
http://www.thumperta...ad.php?t=582029

Here's a link with more detail on how I set up my triple clamps, bars, risers, and stabilizer. The stabilizer is great off road and on the street. http://www.thumperta...ad.php?t=544350

I've never tried a fork brace but there are a lot of believers out here.

evomx971


Thanks for the links that will help alot. Where is Precision Concepts located?
Thanks Ron

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • martinfan30

Posted January 17, 2008 - 09:16 AM

#24

I am looking at buying a XRL pig in the next few weeks, only trouble is I am putting a pig on it too! I am 6'5" and #290, and after getting a couple of quotes for the suspension work, I have two answers. I have had one guy tell me I need springs and a re-valve, and two guys telling me I just need to re-spring, and change the oil viscosity in the front, and that should do it. To do ONLY the springs, its going to run about $250, spring AND re-valve, double that. Thats for fronts & rears both. Keep in mind that I told them I wanted to ride about 30% paved, 50$ dirt roads/firetrails/2-tracks, and 20% trails.

Dave


I would choose the spring and revalve myself.

Thanks for the info!

  • evomx971

Posted January 17, 2008 - 09:40 AM

#25

I don't have the final bill here at work, but with a set of new eibach front springs, revalving, and I'm pretty sure they put new seals and bushings in everything it was around $700.

Springs are the most important suspension upgrade. I don't doubt that springs and doing some tuning with fork oil weight and height can do a lot. If you do a product search for the L on the Race Tech site, in the results there are links for a spring rate calculator where you can describe your type of riding and weight so if a guy just wanted to order his own springs and install.

Precision Concepts is in CA. They do all the suspension for Honda's desert racing teams. http://www.precisionconcepts.net/

Good folks, easy to talk to on the phone.

  • ovationdave

Posted January 17, 2008 - 04:18 PM

#26

Oh, by the way, I meant to post suspension places that I talked to (all in Michigan), sorry about that.......

http://www.pro-action.com/
http://www.mcrsuspension.com/
http://www.tech-care.com/

Good luck!

Dave





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.