07 wr450 fork seal replacement


2 replies to this topic
  • MaynardF16

Posted January 13, 2008 - 12:46 PM

#1

My WR450 blew a fork seal on the third ride and I need to replace it. I have a small dent (learining curve moving from a 250 to a 450) in the lower tube that may be causing it to leak. I have the forks here but the owners manual is out in the desert with the rest of the bike. Two questions:

1) Does the 07 WR450 shock disaasemble like the one in the FAQ? I rebuilt my 03 WR250 fork using that without any problems.

2) What is the oil height/quantity for the 07?

Tried searching but nothing came up. Thanks in advance.

Maynard
07 WR450
03 WR250
06 TTR90

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • rich1167

Posted January 13, 2008 - 01:05 PM

#2

can't your answer question. But heres a link to your manual:
http://www.yamahaown...ook.com.au/?r=0

  • MaynardF16

Posted January 13, 2008 - 04:55 PM

#3

Thanks for the link. I found what I was looking for. It is too bad they don't let you print the sections you need. To answer my questions:

1) Yes the FAQ section will work.

2) The height is 132mm.

Thanks again

Maynard
07 WR450
03 WR250
06 TTR90




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.