Frame Guards?


10 replies to this topic
  • Old Graybeard

Posted January 12, 2008 - 12:08 PM

#1

Spending a little jing on the L this winter and I know I've seen this thread before but does anyone run these on their L and were did ya get em? I've got an 07. Thanks man.

  • XRsteve

Posted January 12, 2008 - 01:09 PM

#2

I managed to find a set of acerbis frame guards a couple of years ago. I don't think they make them anymore. All years should be the same. And a lot of people have adapted XR600 guards to work.

  • absynth01

Posted January 12, 2008 - 01:48 PM

#3

Most will work with slight to no mods. I have UFO's on my 04'. They were for an 89' XR600R with a drum brake. I haven't looked at the 91' and up with rear disk, but assume they fit better. Disk guards are off same. 25$ for each set

Posted Image
Posted Image
Posted Image

  • Jbo

Posted January 12, 2008 - 04:21 PM

#4

Works connection makes very nice Al guards for the XR600R / XR650L

jbo

  • zrxer

Posted January 12, 2008 - 04:35 PM

#5

absynth01, the black on your engine looks sweet.:banghead: I always thought the '80s XR/XL 600s looked excellent with red bodywork/frame and black engines. Bruce

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • absynth01

Posted January 12, 2008 - 10:31 PM

#6

absynth01, the black on your engine looks sweet.:banghead: I always thought the '80s XR/XL 600s looked excellent with red bodywork/frame and black engines. Bruce


Thats my 04' xr650l with 89' plastic guards. Here is the 89' xr600r. Been through a little more ruffage!
Posted Image
Posted Image

  • absynth01

Posted January 12, 2008 - 10:42 PM

#7

Posted Image

  • lhark

Posted January 14, 2008 - 03:00 PM

#8

I used a set of Works Connection frame guards from an XR600, on my '01 XR650L. I had to drill holes in them, to be able to go over the passenger peg lugs on the frame, but they work, and look, great. I'd imagine just about any set made for XR600 would have to be drilled, or trimmed, to clear the mounts, so they'll lay flat. IMO, anyway.

  • Norge

Posted January 14, 2008 - 03:12 PM

#9

I used a set of Works Connection frame guards from an XR600, on my '01 XR650L. I had to drill holes in them, to be able to go over the passenger peg lugs on the frame, but they work, and look, great. I'd imagine just about any set made for XR600 would have to be drilled, or trimmed, to clear the mounts, so they'll lay flat. IMO, anyway.


I did the same and they work great, The works connection guards provide more surface area for the side of your boot.

  • Coolidge

Posted January 14, 2008 - 03:42 PM

#10

I picked up a set of UFO guards on Ebay. From a seller in UK. They were the only ones I could find. They were like 20.00-something dollars
Posted Image

  • Old Graybeard

Posted January 15, 2008 - 05:42 AM

#11

Thanks a bunch for all your inputs. Y'all are the reason I come here. Many thanks! OGB





Related Content

Forums
Photo

ignitech programmable XR650L CDI by brianhare


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies
Reviews

Honda XR650L 2017 by Chris.GVS


Honda XR650L 2017
  • - - - - -
  • 0 reviews
Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
Forums
Photo
Washington

Cle Elum Sunday 5/29: Looking for dual sport tips by TigerTanker


Dirt Bike   Dirt Bike Regional Discussion   Northwest
  • Hot  32 replies
Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  29 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.