'04 WR Front Wheel fit on '07?

2 replies to this topic
  • bhiggins25

Posted January 11, 2008 - 09:38 AM


Okay, I hate to post such a lame question in a new thread, but my search didn't provide a conclusive answer...

Will a front wheel off an 04 WR450 fit on a 07 WR450??

I would guess that it would, but don't know if the odo pickup in the hub was redesigned for the new electronic speedo/odo/computer.

Anyone? Help save my weekend ride!


Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

Posted January 11, 2008 - 12:08 PM


The hub from what I can recollect from my 04' looked pretty much the same in terms of the ODO pick - up side. All you can do is try, for the weekend if it does not work, see if you can pick up a YZ spacer and take off your ODO cable...

  • CORider63

Posted January 11, 2008 - 09:37 PM


Here's a comparison of the 2004 WR-450F and 2007 WR-450F part numbers:

Hub, Front: - Identical
Bearing: 2004= 93306-90403-00 2007= 93306-90409-00
Spacer, Bearing: - Identical
Oil Seal: - Identical
Rim: 2004= 94416-21003-00 2007= 94416-21018-00
Spoke Set, Front: - Identical
Spacer, Bead: - Identical
Axle, Wheel: 2004= 5BE-25181-00-00 2007= 1C3-25181-10-00
Collar, Wheel: 2004= 5NY-25183-00-00 2007= 5TJ-2510C-80-00

Gear Unit Assy: 2004= 5NG-25190-50-00
Sensor, Speed: 2007= 5TJ-83755-C0-00

Nut: 2004= 90179-16672-00 2007= 90179-16011-00



Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.