fork seals for '02 YZ426F????


1 reply to this topic
  • sac36555

Posted January 03, 2008 - 09:06 PM

#1

my fork seals on my '02 YZ426F have been leaking a lot and its time to re-do them. i haven't done a fork seal job on a bike myself and was wondering if you could give me any tips, maybe pics to help. its so cheap to do it yourself vs. paying a mechanic!

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted January 04, 2008 - 06:56 AM

#2

Do you have a manual?

http://www.yamaha-mo...ice/manuals.jsp

Follow the disassembly up to page 5-30. Once the inner tube is out, you need not tear down further unless you want to do a thorough wash out of the dampers and base valves. You can pick the reassembly back uo at step 6 on page 5-33.

You will need a seal driver. Some have made their own out of PVC, but these don't work nearly as well as the real deal. Drivers run from $40-65. Motion Pro makes them, as do others.





Related Content

Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo
Supercross

Wilson the Blue Privateer by jetfuel


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.