Heavy Duty Clutch Cover?


10 replies to this topic
  • BIGGITY

Posted December 31, 2007 - 08:50 AM

#1

Poked a hole in mine this weekend. The covers are thin and can't take much of a beating so I hope there is alternative manufacturer who makes heavier duty covers. I've googled every possible word assortment I can, searched this forum, and I've found nothing.

Any suggestions? I have to get one ordered immediately so I can have it in time for the D38 race this weekend.

Thanks!:banghead:

  • cleonard

Posted December 31, 2007 - 10:10 AM

#2

With the holiday tomorrow, I'd be trying to patch the broken one as it might not be possible to get one in time.

I'm not sure if there is an aftermarket even available. Hinson doesn't make one.

  • miguelitro

Posted December 31, 2007 - 12:48 PM

#3

biggity- i also cracked mine and was lucky that chapparal had one inn stock w/ gasket 50$ shipped.

i am also gonna pick up one of these-
http://www.*********...ards/XR650R.htm

see you at the race- I'll be riding sweep.

mike

  • BIGGITY

Posted December 31, 2007 - 01:11 PM

#4

Mike,

Looks like you finally upgraded to a new Pig huh? I'm jealous now since you have a 07!

Anyway a buddy of mine ended up finding a company who makes a reinforced outer aluminum cover and I'm going to try that. I'll post the link later. $20 for the cover! Good deal.

See you this weekend:ride:

Josh

  • miguelitro

Posted December 31, 2007 - 01:19 PM

#5

josh- get me that link!

Mike

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • BIGGITY

Posted January 02, 2008 - 12:44 PM

#6

Mike,

Here is the link. I guess you just glue it over your normal clutch cover with some RTV Loctite Silicone Adhesive.


http://www.*********...in-frameset.htm

www.***********************/Engine_Guards/guards-main-frameset.htm


Hope that helps!

  • miguelitro

Posted January 02, 2008 - 01:06 PM

#7

i guess you can no longer post links to non paying sponsers product here???

so for the link posted it is motorcycleproducts dot org

  • BIGGITY

Posted January 02, 2008 - 01:09 PM

#8

Mike,

Well thanks to TT we just wasted a good chunk of time. Both of us are posting the same link.

Atleast we found something! Good luck Sunday!:banghead:

  • miguelitro

Posted January 02, 2008 - 01:26 PM

#9

i kinda thought so as there are no other options.:banghead:

I would give you mine if i wasnt going to be out on the course on my bike...

you want my cracked one, it only leaks a little?

Mike

  • BIGGITY

Posted January 03, 2008 - 10:29 AM

#10

Mike,

Appreciate the offer but I think I'm just going to JB weld it today. The leak isn't that bad so the JB weld should hold (I hope).

Josh

  • perryg114

Posted January 03, 2008 - 11:36 AM

#11

I have been trying to get TT to unblock my link for a long time. Maybe you guys can talk to them and get them to unblock it. In the mean time you can use some alternative links. I don't have their links blocked on my sights.

advmp.org
bar-risers.com
offroadbikes.org

Perry


i guess you can no longer post links to non paying sponsers product here???

so for the link posted it is motorcycleproducts dot org







Related Content

Forums
Photo

DirttyPig 2005 Xr650l Prroject! by braapmebb1moretime


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 22 replies
Reviews

Honda XR650L 2017 by Chris.GVS


Honda XR650L 2017
  • - - - - -
  • 0 reviews
Forums
Photo

Wiseco 101MM Spark Knock Low Engine Temps by imandrewparks


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 7 replies
Forums
Photo
Supercross

Supercross Preview 2017 Part 1: Championship Contenders by Chris Cooksey


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  132 replies
Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.