Trail Tech Vapor Computer


1 reply to this topic
  • 1gdsm4life

Posted December 29, 2007 - 11:52 PM

#1

hey, i just got A trailtech Vapor computer, and it will be hooked up to a
05' YZ450. the manual is good, but i was going to ask you if you hooked one up how did you do it or did it?? anything helps

Thanks Again,

God Bless

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • swatdoc

Posted December 30, 2007 - 01:46 AM

#2

not positive if the color codes are exact, since mine is an 07, but if they are, for the power hookup, the red wire from the vapor power lead connects to the green wire from the stator, and the black wire to the vapor power connects to the black wire with the yellow stripe from the stator. What I did was pull the terminals out of the connector and soldered the red and black wires right to the terminals, then installed the terminals back into the conector. The connector I'm talking about is the big connector - 6 wires I believe - between the stator and the cdi. Use the connector on the cdi side to tap in to.





Related Content

Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.