Shrouds for IMS tank

4 replies to this topic
  • mjl300XC

Posted December 29, 2007 - 10:29 AM


OK, I suck at the search feature. My wife just got me an IMS 3.1 tank for my 06 WR450. Here is the question. Do I need to get the YZ shrouds or can I use my WR ones? If I do need YZ's what year do I get? Thanks for the help. Next is suspension and graphics.

  • ThompsonV311

Posted December 29, 2007 - 11:59 AM


Not positive but I think you only need the YZ shrouds for 07 and up WR's.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • SID013

Posted December 29, 2007 - 04:39 PM


I have an '06 & fitted a Clarke tank. They told me I needed YZ shrouds but when I got the tank my WR ones fitted. I believe the '06 WR & YZ use the same shroud. Clarke also told me I needed a YZ seat also but that wasn't the case as the YZ doesn't have a battery so the YZ seat doesn't have a cavity in the base to accomodate the battery.

Hope this helps.

Cheers from Oz.

  • CORider63

Posted December 29, 2007 - 09:22 PM


'06 -'07 YZ-250/450 shrouds.

  • SXP

Posted December 30, 2007 - 12:22 AM


Or, as some people have stated in other threads, the WR shrouds will fit just fine, you will just have to leave out the two bolts (one for each shround) on top of the tank/under the seat. That's the way I'm running my bike now with the IMS 3.1G tank with no issues.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.