Mark II Pivotpegs for 08 YZ450f


2 replies to this topic
  • Wes Woodin

Posted December 27, 2007 - 06:54 PM

#1

I wanted to know if anybody has used these pegs on the 08 YZ450f yet. I would like to get some but want to be sure of a few things first. I used to run Fastway 3 pegs and loved them. One thing I loved about them is that they had two positions. (High, Low.) The problem with running the fastways in the lowboy position is they hit the lower mounting bolt. The only to make them flush is to run the screw all the way in then grind the screws down, otherwise with the screw out it would not be level and pegs would be to far down. Here is the question. #1 The mark II Pivotpegs do offer the lowboy position, but do they have the problem in hitting the lower mounting bolt. #2 it seems that the main support of the pivotpeg is the screw itself. I would hate it if it broke. Any problems with the pivotpeg breaking. It seem that the stock peg or any static peg would be much stronger. I realy do like the concept of the pivotpeg and they do look great as far as fit and finish.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Norman

Posted December 27, 2007 - 08:21 PM

#2

I rode a CR450X with them and thought they felt very awkward, I too used the Fastways on my CRF, Im sticking with the stock 08's, if you decide to get rid of them let me know.

  • todds924

Posted December 27, 2007 - 08:44 PM

#3

I rode a CR450X with them and thought they felt very awkward, I too used the Fastways on my CRF, Im sticking with the stock 08's, if you decide to get rid of them let me know.


Stock 08 pegs are beautiful.





Related Content

Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.