02 YZ426F Stator Questions...


5 replies to this topic
  • JRYZ426

Posted December 27, 2007 - 10:42 AM

#1

Gentlemen,

Will the lighting stator off of a WR250 work on a YZ426? :banghead:


Thank you,

JR

  • Terrain Rider 4z

Posted December 27, 2007 - 11:43 AM

#2

Looking at the fiche they are different part numbers. I have not tried it personally, but doubt that they will cross over.

The stator and flywheel that you want is either a 2000 WR400 or a 2001-2002 WR426. These are both 130 Watt max AC stators that will work with your YZ. I am using a 2000 model and also purchased the matching CDI and wiring harness. You can use the YZ CDI with modifications.

  • JRYZ426

Posted December 27, 2007 - 04:53 PM

#3

Very good, I really appriciate the help.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 1rkcooper

Posted December 27, 2007 - 08:21 PM

#4

I just saw an eline kit on ebay if you're interested.

  • JRYZ426

Posted December 27, 2007 - 10:44 PM

#5

Thank you very much!

  • JRYZ426

Posted December 28, 2007 - 06:54 PM

#6

I just saw an eline kit on ebay if you're interested.



Well, I bought it. It doesn't have any instructions so I hope E-Line will help me out with some. I emailed them late today so I should hear from them next week. The kit maybe missing a keyway and I hope nothing else. The kit also includes a new shifter to clear the stator housing that sticks out. The guy also had a YZ426F 2000-02 Kick-it Kickstand that I picked up minus the 2mounting bolts. Thanks again for your help and wish me luck...

JR





Related Content

Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.