Couple of smog removal Q's (I searched)


6 replies to this topic
  • auron

Posted December 18, 2007 - 08:18 AM

#1

http://www.4strokes..../honda/xrlsmog/
This is the great link for a 95', what has changed since then? Mine's an 06.

Where does that small grey hose that connected to the smog thingy go?

And will a gasket sealant good for 350F be good enough for the oval covers on teh cylinder head?


Thanks!

  • martinfan30

Posted December 18, 2007 - 08:33 AM

#2

http://www.4strokes..../honda/xrlsmog/
This is the great link for a 95', what has changed since then? Mine's an 06.

Where does that small grey hose that connected to the smog thingy go?

And will a gasket sealant good for 350F be good enough for the oval covers on teh cylinder head?


Thanks!


no difference. unless u have a cali model. it has another cannister.

not sure which hose you are talking about, pic?

i didnt use any sealant, and it has never leaked. temps there can get up to 450.

  • Denn10

Posted December 18, 2007 - 09:56 AM

#3

if your gonna use sealant just go get some hi temp permatex silicon the copper golding stuff and just use a tad, should be fine

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • auron

Posted December 18, 2007 - 11:07 AM

#4

no difference. unless u have a cali model. it has another cannister.

not sure which hose you are talking about, pic?

i didnt use any sealant, and it has never leaked. temps there can get up to 450.



The grey hose is in Pic #15, (on the link) it runs almost vertical off the smog thing and is just touching the fins 1/2 way up the cylinder

  • martinfan30

Posted December 18, 2007 - 11:14 AM

#5

if i remember right, that hose connects to the front of the carb above the throttle bore? i removed that hose and capped the vacuum nipple.

  • Denn10

Posted December 18, 2007 - 11:30 AM

#6

mine was removed but there were a few going to carb that are closed now pic 15 i dont see a hose going to cylinder just back to carb/airbox area.

  • martinfan30

Posted December 18, 2007 - 01:56 PM

#7

mine was removed but there were a few going to carb that are closed now pic 15 i dont see a hose going to cylinder just back to carb/airbox area.


its a smaller diameter hose that just touches the back of the fins and goes up.


put yer specs on!lol/





Related Content

Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Forums
Photo

93 xr650l Restoration Project by Zigster


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 17 replies
Forums
Photo

2015 XR650L Squeaking noise by Crayjay


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 3 replies
Forums
Photo

DirttyPig 2005 Xr650l Prroject! by braapmebb1moretime


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 22 replies
Wiki
Want to add a kickstart to your XR650L?  Here's how - last post by clc3251

Want to add a kickstart to your XR650L? Here's how


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.