OEM or Aftermarket brake pads??


2 replies to this topic
  • dmoney1074

Posted November 08, 2007 - 09:13 PM

#1

Im looking for the most bite (for dual sport use)... What do you think??

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 2grimjim

Posted November 08, 2007 - 09:24 PM

#2

If you are brake happy and get your brakes really hot a lot you might want to consider carbon/kevlar based pads. They will transmit less heat to the calipers, but they will not last as long.

EBC and other aftermarket manufacturers make brake pads that are as good or better than stock.

I have never seen any advantage in using O.E.M. brake pads.

  • Alternative

Posted November 10, 2007 - 03:07 PM

#3

I've got EBC HH-rated sintered pads in the original caliper on my 320mm front disc and they work very well. They have good feel and would stand my bike on its nose no problem :thumbsup::ride:




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.