welding



2 replies to this topic
  • skippy

Posted March 26, 2002 - 01:04 AM

#1

I am about to do some welding on the frame on a wr400 -99. I'm concerned about damageing the electrics or something else. Is there any precautions that need to be done. Can anybody help

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • SFO

Posted March 26, 2002 - 05:53 AM

#2

If you are worried about the electrics being damaged, remove them.
Otherwise, just make sure you run your ground right next to where you are welding.

  • MAZ

Posted March 26, 2002 - 11:32 PM

#3

Make sure you unplug your stator or you could burn it out, also CDI to be safe.

I found out the hard way years ago on a XR600. Can't help to be safe, might save you a few bucks




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.