rekluse question


4 replies to this topic
  • dodds

Posted October 26, 2007 - 01:53 PM

#1

Hi,
Just a quick rekluse question, i have just fitted the rekluse to my 426. I have fitted the standard clutch with no perch aduster, my question is does the original clutch actuator spring get cliped back on at the end of the fitting process or is it left unclipped. Also what have people found better to fit, the soft or medium spring ?? cheers.

  • TD-3

Posted October 26, 2007 - 03:31 PM

#2

Leave the original spring UNHOOKED. I personally use the soft spring adjusted tight.

Good luck..

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • dodds

Posted October 27, 2007 - 03:11 AM

#3

Thanks for that. I have read all i can on the rekluse and will test the bike for the first time on wednesday. If any one has any quick bits of advice on setup please leave your tips, cheers Mark.

  • 642MX

Posted October 27, 2007 - 02:45 PM

#4

Thanks for that. I have read all i can on the rekluse and will test the bike for the first time on wednesday. If any one has any quick bits of advice on setup please leave your tips, cheers Mark.


Put 20 minutes on it and recheck the installed gap. The weaker spring will make your fiber plates last longer. And use Rotella 15W40, the stuff is magic in a bottle for auto-clutches. :worthy:

  • kenr74

Posted October 27, 2007 - 05:09 PM

#5

Leave the original spring UNHOOKED. I personally use the soft spring adjusted tight.

Good luck..


Same here. I haven't tried the other spring but the soft one works great.





Related Content

Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.