Can yu put Graphics on a.....
1.TTR-125L
2.TTR-125
3.DR-125L
4.DR-125
5.YZ-85
6.CR-85
7.RM-85
Say Yes or No In order of number Thanx!!!!!!!!!
CAN YOU.....
Started by
DirtBikeMigit
, Jul 19 2002 03:44 PM
9 replies to this topic
Posted 20 July 2002 - 12:12 AM
No. All of those bikes have special plastic that is impervious to graphics application. 
Posted 22 July 2002 - 05:38 AM
Depends what kind of graphics you're referring to... Are we talking about the polyvinyl heat rendered acetone resistant factory specified third generation x-series graphics? Or just a cheap knock-off?
Sorry, just kidding.
Yes you can to all...
Sorry, just kidding.
Yes you can to all...
Posted 22 July 2002 - 10:01 AM
The problem with minibikes is that they attract this specific static electricity. When you pull off old graphics you accellerate the charged particles and your bike could very well explode leaving you with some nasty injuries and a big mess.
Posted 22 July 2002 - 11:09 AM
Trevor is right again. Unless you have a Flux Capacitor, the explosion could knock you into the seventh dimension.
Posted 22 July 2002 - 11:18 AM
I've also been told if you have trouble getting the graphics off the tank you can use a plasma cutter to get 'em off in a pinch. Check with your parents first on this one.
Posted 22 July 2002 - 11:28 AM
Trevor is right again. Be sure that your plasma cutter is in phase or you could end up going plaid.
(oops, wrong thread...)
(oops, wrong thread...)
