XR650R.borynack.com


14 replies to this topic
  • BWB63

Posted October 22, 2007 - 07:44 PM

#1

I am getting overwelmed with emails and PM's asking about the web site......

I am working on it and not fixing it:cry:
but, I did get the suspension pages loaded as WORD.doc's

http://borynack.com/...pension ww1.doc

http://borynack.com/...pension www.doc

please save these till I get the web site working.....

  • weskc35k

Posted October 22, 2007 - 11:32 PM

#2

Hang in there,we all appreciate your efforts and wish you well with it.

  • TrailRiderXRL

Posted October 24, 2007 - 02:53 AM

#3

Your work is much appreciated!
Thanks

  • BWB63

Posted November 12, 2007 - 04:45 PM

#4

New address to Borynack's XR650R web site:

http://borynack.com/XR650R/

or

http://borynack.com/xr650r.htm

They need work but, some of them work.

  • TrailRiderXRL

Posted November 12, 2007 - 05:30 PM

#5

Great to hear! Thanks again for all the awesome info!

  • BWB63

Posted November 12, 2007 - 06:02 PM

#6

It was crazy mad. It turned out in the end that when I put in the new hard drive I didn't turn off the windows firewall. I am running another firewall and set it up to let me upload to the site but, the windows firewall was stopping it. Round and round fighting looking for what was stopping me from fixing the site. Thanks for the support.

New address to Borynack's XR650R web site:

http://borynack.com/XR650R/

or

http://borynack.com/xr650r.htm

They need work but, some of them work.

  • Juxxtin

Posted November 12, 2007 - 07:28 PM

#7

Before I had one, I read a lot... your site included.
Sooo... my official THANKS! :thumbsup:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Brtp4

Posted November 13, 2007 - 12:48 PM

#8

Bruce, how did you arrive at the conclusion that RT and LE spec their springs too stiff?

FYI I have .49s in my L (no latte jokes please). Normally I run my front way susp a little stiff, on this bike the turning absolutely sucks with this setting.

FYI 220 lbs, 10 - 15 lb pack.

BP

  • BoneDigger

Posted November 13, 2007 - 08:12 PM

#9

Thank's for your help with my forks last week.
They are killer,now!

  • jesusgatos

Posted November 13, 2007 - 10:47 PM

#10

If you have any more problems with your website, I'd be happy to host you stuff at trailslesstraveled.com. You've helped all of us out with a lot of great tech.

  • BWB63

Posted November 14, 2007 - 06:59 AM

#11

The "L" is a whole different bike. The extra 50 pounds has to be supported by more spring. I am sprized that you only need .49kg/mm with the pack. Most all the guys have come to see that the spring chart from XR's only is the way to go. Barnum, PC, Baja Designs all use that same chart that is on the site. RaceTech and LE use a software program that was biult for MX suspension. I thought Racetech fixed there program after I talked o them and now it is real close to the same if you chose the enduro setting.


Bruce, how did you arrive at the conclusion that RT and LE spec their springs too stiff?

FYI I have .49s in my L (no latte jokes please). Normally I run my front way susp a little stiff, on this bike the turning absolutely sucks with this setting.

FYI 220 lbs, 10 - 15 lb pack.

BP



  • XR680RR

Posted November 15, 2007 - 09:56 AM

#12

I noticed that

http://borynack.com/XR650R/
and
http://borynack.com/xr650r.htm

look totaly different. Are they mirrored sites? Going through the shim stacks I am starting to see that it is not that many shims that I need to buy but, some moved from other stacks. In the forks you added .40mm X 10mm shims or something like that. What are they for? You wrote that they are not really needed? Do ou have some time to write a page of step by step of what each change does. Maybe I can make a chart for you once I get the idea of what - what does. Sometimes a picture makes things click better for those taking the big step of doing this work theirself. I did it and bought to many shims because I didn't see the big picture. The suspension is awesome different and I couldn't think of it being better but, now that I have done it I am starting to see more of what is going on the more I look at this stuff. Things start popping out of comparing the charts and reading all of it and not just the stuff that I thought I had to read. There is a lot of stuff hidden in links and pages that don't work anymore but, I am starting to find it.

  • TrailRiderXRL

Posted November 15, 2007 - 11:41 AM

#13

I noticed that

http://borynack.com/XR650R/
and
http://borynack.com/xr650r.htm

look totaly different. Are they mirrored sites? Going through the shim stacks I am starting to see that it is not that many shims that I need to buy but, some moved from other stacks. In the forks you added .40mm X 10mm shims or something like that. What are they for? You wrote that they are not really needed? Do ou have some time to write a page of step by step of what each change does. Maybe I can make a chart for you once I get the idea of what - what does. Sometimes a picture makes things click better for those taking the big step of doing this work theirself. I did it and bought to many shims because I didn't see the big picture. The suspension is awesome different and I couldn't think of it being better but, now that I have done it I am starting to see more of what is going on the more I look at this stuff. Things start popping out of comparing the charts and reading all of it and not just the stuff that I thought I had to read. There is a lot of stuff hidden in links and pages that don't work anymore but, I am starting to find it.


Do you have any shims you would like to sell? I'm looking for:
Looking for:

8mm i.d
6 .15mm X 21mm
2 .40mm X 10mm

12mm i.d
4 .25mm X 38mm

  • bigtooth

Posted November 15, 2007 - 12:51 PM

#14

Do you have any shims you would like to sell? I'm looking for:
Looking for:

8mm i.d
6 .15mm X 21mm
2 .40mm X 10mm

12mm i.d
4 .25mm X 38mm



Try mx-tech.com for shims, I bought all the ones I needed to do the Baja setup for under 20 bucks, they didnt have some listed on their site, so I emailed them and they had them anyway. You can buy the shims in singles or in packs of 10. They were very plesent to deal with:thumbsup:

  • TrailRiderXRL

Posted November 15, 2007 - 03:18 PM

#15

Try mx-tech.com for shims, I bought all the ones I needed to do the Baja setup for under 20 bucks, they didnt have some listed on their site, so I emailed them and they had them anyway. You can buy the shims in singles or in packs of 10. They were very plesent to deal with:thumbsup:


Cool...I'll give them a try!
Thanks





Related Content

Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  28 replies
Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Forums
Photo
Washington

Cle Elum Sunday 5/29: Looking for dual sport tips by TigerTanker


Dirt Bike   Dirt Bike Regional Discussion   Northwest
  • Hot  32 replies
Wiki
Want to add a kickstart to your XR650L?  Here's how - last post by clc3251

Want to add a kickstart to your XR650L? Here's how


Articles
  • 0 replies
Forums
Photo

Engine Loping/Sputtering by tcaldwell


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 2 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.