Painting Cylinder head and crankcase


1 reply to this topic
  • ripemango

Posted October 16, 2007 - 04:18 AM

#1

Hi there,
I'm about to rebuild my bike (93 Honda xr600r) and just wanted to know what you would suggest as the best way to make the cylinder head and lower crankcase look like new. I just got a couple cans of PJ1 Sandable Primer and a couple cans of Yamaha Silver Case Paint 500F and well as DupilColor High Heat with Ceramic 1200 Degree (Alluminium Color) which I'm hoping to spray on the cylinder head. Any Advice?? Just read on another forum where a guy said his bike started to overhead after painting those parts ???
Look forward to hearing from you all.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • crmc33

Posted October 16, 2007 - 12:21 PM

#2

I used silver smoothrite spray on my lower crank case.
I would stick to bead blasted bare metal on the cyl head if you can.

I have used matt black paint on the head before which may be an option.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.