'01 and '07 Parts compatability???


7 replies to this topic
  • dmoney1074

Posted October 11, 2007 - 06:11 PM

#1

Thinking of upgrading to the '07 from my '01 wr426f... wanted to see what parts will/might fit on the '07.

1. Wheels (Talon hubs)?
2. Triple clamps?
3. Scotts SS oil filter?
4. FMF powerbomb/ q2

I have alot of other parts I want to carry over like bars, handguards, vapor, etc... and I'm sure the'll fit.

Im so glad I kept all the old parts! :confused:

  • dmoney1074

Posted October 11, 2007 - 06:17 PM

#2

I just checked the part numbers for the wheels:
The rear hub and spacers are the exact same.....
The front Hub is a bit different... What do you all think?

  • JSanfilippo

Posted October 12, 2007 - 11:16 AM

#3

Thinking of upgrading to the '07 from my '01 wr426f... wanted to see what parts will/might fit on the '07.

1. Wheels (Talon hubs)?
2. Triple clamps?
3. Scotts SS oil filter?
4. FMF powerbomb/ q2

I have alot of other parts I want to carry over like bars, handguards, vapor, etc... and I'm sure the'll fit.

Im so glad I kept all the old parts! :crazy:


The scotts SS oil filter will fit. Pretty much all the yamaha singles (from TT-Rs to quads to Rhinos to these fine race machines) have the same oil filter.

The exhaust will not fit. Any exhaust off a 2006 or 2007 YZ 450f will fit. If you don't replace the header with a YZ or aftermarket header, you will need to use the gasket sleeve that is in the stock WR midpipe B/C the stock WR header is a smaller diameter than the YZ or aftermarket headers.

Don't know about the triple clamps

  • SJMC_DON

Posted October 12, 2007 - 12:00 PM

#4

I don't think the front hub will work with the 07' odo head.

07' forks are bigger in diameter so clamps will not work.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • JSanfilippo

Posted October 12, 2007 - 02:05 PM

#5

07' forks are bigger in diameter so clamps will not work.


I forgot about that :crazy:

  • dmoney1074

Posted October 12, 2007 - 02:56 PM

#6

I don't think the front hub will work with the 07' odo head.

07' forks are bigger in diameter so clamps will not work.


I dont care about the odo pickup.... I will hook up my vapor!

Besides that should it fit?

  • SJMC_DON

Posted October 12, 2007 - 05:03 PM

#7

I dont care about the odo pickup.... I will hook up my vapor!

Besides that should it fit?


Sure just get a YZ spacer and seal for the right side :crazy:

  • tweav

Posted October 13, 2007 - 02:48 AM

#8

I was told by my dealer that any year of the wr front wheel , would fit my 2007 but not much else off of an older one will.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.