GTYR catalog


12 replies to this topic
  • 426 NOOB

Posted October 03, 2007 - 12:54 PM

#1

Where can I get a GTYR catalog that has the manual decompression thumb lever in it. I have tried surfing the net and cannot even find a picture of the product. Any help would be much appreciated. -Cam

  • grayracer513

Posted October 03, 2007 - 01:02 PM

#2

http://www.yamaha-mo...5372/all/2.aspx

That, by the way is not a decomp lever, it's a hot start lever. But it will work.

And I still say the autodecomp conversion is money much better spent.

  • jayh300

Posted October 03, 2007 - 01:10 PM

#3

http://www.yamahaacc..._732_All_1.aspx
i think this is what you are looking for.
agree with gray.... do the conversion
jay

  • grayracer513

Posted October 03, 2007 - 01:48 PM

#4

http://www.yamahaacc..._732_All_1.aspx
i think this is what you are looking for.
agree with gray.... do the conversion
jay

A Classic revisited. And only $75! :confused:

The GYT-R catalog now only goes back to '03, so they don't show that one. Cool though.

Just do the cam. :confused:

  • jayh300

Posted October 03, 2007 - 01:56 PM

#5

yeah, i had looked at that before i put the cam in mine, so i had it book marked. i thought it looked like a good idea, but the no lever looked better.

  • maxx2200

Posted October 03, 2007 - 02:44 PM

#6

http://www.ncyyamaha...ION_RELEASE.htm
Try this link, if that doesn't work go to ncyyamaha.com or any Yamaha dealer web site should list it in their accessories catalog.
They do offer a compression release for a YZ426F. I verified it before I replied to you.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted October 03, 2007 - 02:49 PM

#7

Cool. Now we're up to $90 for the lever! :confused:

Only $16 more dollars 'til it's as expensive as the '03 cam.

  • maxx2200

Posted October 03, 2007 - 02:51 PM

#8

Try this one, I've dealt with them locally. Good customer service, they'll ship.
http://webstore.vick...on-release.aspx

  • maxx2200

Posted October 03, 2007 - 02:52 PM

#9

Is the '03 Cam Mod you're talking about only $106 parts and labor? If so than it truly is a no brainer.

  • grayracer513

Posted October 03, 2007 - 02:55 PM

#10

Parts only. Installation is a near no brainer.

  • 426 NOOB

Posted October 04, 2007 - 07:54 AM

#11

That settles it. The cam it is. Thanks all.

  • grayracer513

Posted October 04, 2007 - 09:09 AM

#12

That settles it. The cam it is. Thanks all.


A wise choice. Buy your cam through TT OEM Parts or crotchrocket.com to get the kind of pricing I mentioned. Part number is 5TA-12180-00-00. If you have never replaced the cam chain, you should probably plan to do so at the same time. (Use the 426 chain only)

Be sure to visit the Common Threads sticky at the top of the forum index and pull down a copy of the timing instructions. The 450 timing marks don't work like the stock ones. It's not hard, just different. Post if you get stuck.

  • Dolce_Grappa

Posted October 05, 2007 - 12:02 AM

#13

Just wanted to through out the Hotcam option. It does cost more, but the Hotcam has the same camshaft sprocket pitch that his stock camshaft has. Which isn't the case for the 450 cam.

BTW, I haven't heard of any issues with the 450 exhaust cam, but he should be made aware of the differences.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.