endurace speedo and EBC disc

2 replies to this topic
  • scalejockey

Posted September 22, 2007 - 02:23 PM


After i put on a oversized EBC disc my "endurace" speedo reads fast. Reset all settings,wheel size etc. have the magnet mounted on the wheel in the same spot (disc bolt) Has anyone else had this problem??

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • lhark

Posted September 22, 2007 - 04:16 PM


The only thing I can think of, is that the original sensor mount must have been set in such a way that it double counts. You might want to try locating the magnet further away (towards the axle, and maybe only a millimeter, or so at a time) from the sensor, to see what happens.
I can't imagine what else could do this......I've mounted a few in my time.
I would also call Trailtech.....they've been a great resource for info, on some of the different apps I've tried.

  • scalejockey

Posted September 22, 2007 - 07:50 PM


thanks for the input ,I'll try and call trailtech monday. Iv'e taken a closer look and on the old disc there is air space between the mount bolts (as you spin the tire) and the new one is solid . I can mount the magnet farther out on the new rotor but that means i have to drill and tap another hole in the caliper adapter.Just want to make sure before i do it.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.