polished clutch and ignition covers

1 reply to this topic
  • wes782

Posted September 19, 2007 - 01:25 PM


I dont remember but i thought i saw a write up somewhere from someone on how to do this (kj790?) i tried to search but didnt have much luck if someone could tell me how to do it or send me the link thatd be great!

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • KJ790

Posted September 20, 2007 - 02:58 AM



This might be the one you're looking for. It doesn't really tell you how to polish them though. Fist get all of the old paint off of the covers (sanding or using paint stripper). Then use finer and finer sand paper and then steel wool. Keep working your way to finer sand paper. Then hit them with a little metal polish and a rag and they will shine like a mirror. Once you have polished them it only takes a minute or two to touch them up with some metal polish when they start looking dull.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.