'06 Triple Clamp on an '08


9 replies to this topic
  • DPW

Posted September 17, 2007 - 06:27 PM

#1

Will a top triple clamp from an '06 fit an '08? Standard offset

  • Chilio

Posted September 17, 2007 - 06:57 PM

#2

Per RG3 the top and bottom clamp are the same, but the stem on the 08 is 5mm shorter.

  • grayracer513

Posted September 17, 2007 - 07:23 PM

#3

Not sure about the clamps. The '08 has a trail increase that equates to the use of a 24mm clamp set on an '06. However, the lower fork leg axle lug was redesigned to accommodate the new caliper anyway, and the trail can be altered there as easily as at the clamp. It would make sense for them to have done it like that, since they would then only have to retool one part. If RG3 in fact says the clamps are interchangeable, they most likely are.

  • DPW

Posted September 17, 2007 - 07:59 PM

#4

Per RG3 the top and bottom clamp are the same, but the stem on the 08 is 5mm shorter.


Where did you get that info at? I looked on the RG3 web site and couldn't find anything on the '08s. I hope you're right, it will save me some $$$..:thumbsup:


Thanks for the info guys..

  • Ga450owner

Posted September 18, 2007 - 06:19 AM

#5

Where did you get that info at? I looked on the RG3 web site and couldn't find anything on the '08s. I hope you're right, it will save me some $$$..:thumbsup:


Thanks for the info guys..


DPW...I see you may have made your 08 decision....congrats:thumbsup:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • DPW

Posted September 18, 2007 - 06:31 AM

#6

DPW...I see you may have made your 08 decision....congrats:thumbsup:


:thumbsup: ....thanks,I picked it up last night.

  • Ga450owner

Posted September 18, 2007 - 07:00 AM

#7

:thumbsup: ....thanks,I picked it up last night.



Did Bubba take care of you?

  • DPW

Posted September 18, 2007 - 07:10 AM

#8

Did Bubba take care of you?


No...I just used a local dealer, got tired of trying to find an excellent deal and just went with a deal that was fair/good.

  • DPW

Posted September 18, 2007 - 11:07 AM

#9

Per RG3 the top and bottom clamp are the same, but the stem on the 08 is 5mm shorter.


I just got off the phone with RG3 and they confirmed it will fit..like you said..:thumbsup:


Thanks

  • swaldrop

Posted September 18, 2007 - 11:14 AM

#10

That's good news for me as well. I have an RG3 top clamp coming off of my 07 250F that I want to use on my new 450, so thanks for looking into it...





Related Content

Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.