2004 Xr650l Smog Plate

12 replies to this topic
  • urban escape

Posted September 16, 2007 - 03:18 PM


Need your help....can anyone tell me where I can purchase a smog pump block off plate for my 2004 XR650L.

  • AC-DC

Posted September 16, 2007 - 04:53 PM


Kit on ebay

  • AaronBrown

Posted September 16, 2007 - 08:14 PM


^^^That's the kit I bought. It worked great.

  • Denn10

Posted September 16, 2007 - 08:40 PM


TT store might have em too

  • kex

Posted September 17, 2007 - 04:14 PM



  • T-Doshi9

Posted September 18, 2007 - 04:48 AM



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • martinfan30

Posted September 18, 2007 - 08:41 AM


tt store

  • T-Doshi9

Posted September 18, 2007 - 06:27 PM


i made my own. that was cheaper. it wasn't too hard. did take about 30 mins.

  • martinfan30

Posted September 19, 2007 - 10:06 AM


lets see a pic? not that i cant imagine it in my mind, i'm just curious.

  • KBF

Posted September 20, 2007 - 06:18 AM


I made my own also. All I did was remove the metal pipes from the front of the engine and cut the pipes off, leaving about a 1/2" of pipe on the flange.
Then I flattened the end of that 1/2" in a vise and brazed the end.

It worked great and didn't cost me anything but a little time.

For the vacuum line I plugged it off. The canister got removed and the hoses going to the breather got removed and the holes plugged off.

  • urban escape

Posted September 26, 2007 - 08:15 PM


Thanks for all the input.Im going to make them myself.Feeling physical withdrawls, need to go riding soon!!!!!!:thumbsup: :thumbsup: :thumbsup:

  • T-Doshi9

Posted September 30, 2007 - 08:02 AM


i just cut out a plate that looks like the piece off the tubes... drilled 2 holes for the allen heads and i was done.... it was really easy.. it just needs to block off those 2 holes. it can be a square even... no big fab job... i did it with a grinder and a drill.

  • gearloos

Posted September 30, 2007 - 10:39 AM


I also just put the old ones up on a piece of bar I had layin around, drew an outline, cut/drilled and used silicone gasket sealer and locktite.
Just finished it a couple hours ago actually.
If you can, I'd try and do it myself too because if your buying the kit for insrtuctions, haha forget it, Ive seen the instructions on a friends kit and it was
a worthless half legible copy job. A couple sites online have great pics to follow if you need em.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.