Please Help!!!!!!


No replies to this topic
  • WR ADAIR

Posted September 14, 2007 - 05:57 PM

#1

After breaking in my new 07' I noticed there was some oil around the oil tank breather hose on the end that goes back into the oil tank and I pulled out the hose with ease. Thinking nothing of it. I did my oil change and after trying to dial my fuel mixture screw in the breather just popped out gushing oil everywhere. This problem happened again and the connection of the end of the hose that goes into the oil tank is really sloppy and i can pull it out very easely. Am I Missing an o-ring? Did I ovefill it with oil? SOMEBODY PLEASE HELP!!!




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.