WR450 tail light connector parts


5 replies to this topic
  • AFM546

Posted September 13, 2007 - 06:24 PM

#1

I am rewiring an improperly connected brake light switch on my dual-sported 03 WR450 and wonder if anyone knows where I can get my hands on the male blade crimp-ons that are found on the stock wiring harness (plug) side of the tail light connector. The tail light socket itself is female with three conductors: blue, yellow, and black. Blue is the hot lead for the tail light, black is ground, and yellow is the hot lead for the brake light. The wiring harness only has two conductors, blue for the tail light and black for ground. I want to add the third conductor to the gray plug on the wiring harness and can't find any of the male blades for the plug. Anyone know where I can find them or have a part number for them?

  • kissfan113

Posted September 13, 2007 - 07:29 PM

#2

i've been looking for something similar for my 07 wr450

  • tweav

Posted September 13, 2007 - 11:37 PM

#3

I got my wire ends from this guy on ebay http://cgi.ebay.com/...sspagenameZWDVW

motardrider is his user name . he has the best looking license plate bracket I've seen for an 07 , and he will sell you as much or as little of a kit as you want.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • RJB

Posted September 14, 2007 - 03:28 AM

#4

Okay - done some looking around on exactly this topic recently. The connectors (FRS type) and various required bits can be gotten from these guys here. Matthew was very quick in coming back to me with details. They come in packs of 50 (male and female) at USD17.99/pack. Part number is 34-9295 & 34-9296

  • AFM546

Posted September 14, 2007 - 04:44 AM

#5

Great, thanks, that is exactly what I was looking for. The 34-9295 male pin is the one I need. Also known as FRS-101. Thanks again.

  • AFM546

Posted September 24, 2007 - 03:59 PM

#6

Update: I received a package of these connectors and they do not fit the tail light connector on my 03 WR450. The shape is right but the blade is too wide. I'll probably use a file and alter the profile until it fits since I only need one of them and can't return an opened package.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.