Inner clutch hub problem. Advice needed.

2 replies to this topic
  • kubamtx

Posted September 07, 2007 - 01:31 PM


During last ride I found my clutch preaty laud (typical cluch noise) but louder.
So I decided to take of the clutch cover, springs, pressure plate and check the nut. I found that the nut is tight but inner clutch hub has a little play. It apperas out that steel insert has play in alloy inner clutch hub. So what to do?
I think that it's not normal. The insert can be easly rotate few degres and has side play also.
Should I change the hub immidietally?
Can I ride now during waiting for new hub?
Which hub is the best price/quality mix?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 02YZ426

Posted September 07, 2007 - 02:09 PM


Yeah that happens to them after many hours of hard abuse. Just get another OEM Yamaha part.. they are really cheap. If you want to spend a few bucks extra for something a little stronger you can upgrade to a Hinson or GYTR Yamaha part.

  • grayracer513

Posted September 07, 2007 - 04:03 PM


Should I change the hub immidietally?

Yes. What he said ^

Related Content


Thinking about Yamaha 250... by Arctic Pride

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies

Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.