Front Axle


3 replies to this topic
  • mmbasa

Posted September 06, 2007 - 05:48 PM

#1

Do you tighten the pinch bolts first or the axle nut first?

  • Racer24

Posted September 06, 2007 - 05:50 PM

#2

pinch bolts on the axle bolt side first. if not than the axle will just keep rotating. then b4 you tighten the other pinch bolts. you will have to make sure the forks are aligned

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • KAS

Posted September 06, 2007 - 06:09 PM

#3

Tighten the pinch bolts on the throttle side first to hold the axle in place.

Torque the axle nut to spec.

Loosten all pinch bolts, align the front wheel, then torque pinch bolts to spec.

  • grayracer513

Posted September 06, 2007 - 08:03 PM

#4

http://www.thumperta...127#post3936127





Related Content

Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.