Rear shock

No replies to this topic
  • SealClubber

Posted March 04, 2002 - 07:41 PM


I searched but could not come up with an answer. I wan't to raise my susp back to stock but don't have the cash and want to do it myself anyway. I know the spring is stock and the lower shock mount seems to be stock. It doesn't just sit lower in the stroke, the stroke is less than my buddies 02. How much of a difference in susp travel is there between a 01 and 02 WR?

My questions are;
How is the shock shortened to lower a susp by 2 inches? Is there a different clip position on the shaft or are shorter shafts used?
Is it easy to fix and do I need to release the pressure to do it?
I really don't want to have to send it in to a tuner. Not yet anyway. :)


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.