ok gearing


3 replies to this topic
  • fletcher230

Posted August 20, 2007 - 07:17 PM

#1

is it possible to spilt the cases and put smaller gear in for the first gear to prevent stalling in the tight stuff???

  • grayracer513

Posted August 20, 2007 - 09:55 PM

#2

What year/model is your bike?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • fletcher230

Posted August 21, 2007 - 10:58 AM

#3

2005 Yz 450

  • grayracer513

Posted August 21, 2007 - 11:39 AM

#4

Yes and no. You can install the entire wide ratio 5 speed from a '03-'06 WR450 into the bike, but you have to swap the whole, complete trans out in order to accomplish this. At about $700, it isn't that cheap, but a lot of guys would spend that on a pipe.

Read:
http://www.thumperta...ad.php?t=315799





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.