Little Hole in the gaz tank


12 replies to this topic
  • DanyR1

Posted August 19, 2007 - 11:49 AM

#1

I have a little crack in my gaz tank, anybody have a solution for repair it ???? I have do a research on this site and find nothing helful. :cry: I dont whant to put another $300.00 on this bike. :foul: :foul: :foul: :foul:

  • dr x

Posted August 19, 2007 - 11:50 AM

#2

Is it plastic or metal ?

  • Brokenparts123

Posted August 19, 2007 - 11:54 AM

#3

Weld it.

  • rich1167

Posted August 19, 2007 - 11:58 AM

#4

I have seen a posting about this in the past. I don't think any won came up with a real good plan for it. Some one had a link to a company that sold some kind of plastic repair compound. But the main consensus was to replace it. I would not not recomend repairing it. Their are some used ones on E-bay or you could go this route:
http://cgi.ebay.com/...sspagenameZWD1V

  • DanyR1

Posted August 19, 2007 - 03:43 PM

#5

The tank is on my WR400 1998 and its in plactic.

  • witdogg

Posted August 19, 2007 - 03:46 PM

#6

Might be something to look into to.

http://www.malcom.com/products/pwk.php

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • DanyR1

Posted August 19, 2007 - 04:15 PM

#7

Ok for the welding kit ......but will cost more than a new tank.....

  • GCannon

Posted August 20, 2007 - 08:36 AM

#8

Try this I remember this post was very indepth by some very technical posters
http://www.thumperta...uel tank repair
Good Luck and Good reading!

  • Fredtech

Posted August 20, 2007 - 09:09 AM

#9

I had a small hole on my YZ125 gas tank a while ago and fixed it myself with the epoxy from a fiber glass repair kit (bought at Canadian Tire for less then $15 at the time). Had the bike 2 more years after that with no problems :-)

  • ttr125l95

Posted August 20, 2007 - 09:12 AM

#10

You can take a piece of plastic to cover it up and rivet it into place i think, never done it myself but ive seen it done.

  • kenny1234

Posted August 20, 2007 - 10:03 AM

#11

i d put a waterproof plaster over the hole seems to work well when i get holes in my skin

  • byggd

Posted August 20, 2007 - 03:32 PM

#12

The tank is on my WR400 1998 and its in plactic.


IMO plastic flexes too much to trust a repair. eBay is ok but you don't always know what you are getting. These guys would be my choice. $175 to $199.

http://www.justgasta...type=1&model=55

  • dr x

Posted August 20, 2007 - 05:06 PM

#13

I bought a wr 450 tank on ebay about a month ago it cost £18 + £10 p&p and was in great condition, just check the feedback comments.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.