wr450 2007 to get off electrical wires


5 replies to this topic
  • 2005eulerr

Posted August 17, 2007 - 03:05 AM

#1

How to get off from my bike the electrical cables, such as turn signals, max light, or medium, horn and the leds besides on computer, and also the switch comand on a handlebar. I just need the Headlight and the taillight on. I have get off the turn signals, but all the cables are there.Does anyone have tried?
Thanks!

  • tweav

Posted August 17, 2007 - 03:20 AM

#2

I think your trying to dual sport your bike right? you can buy a dual sport kit from bajadesigns .com their kit will do what you want . but is a little pricey .I'm making my own wiring harness to make 2007 street legal , but it would be much easier to just buy on and bolt it all up

  • Alternative

Posted August 17, 2007 - 02:38 PM

#3

I think your trying to dual sport your bike right? you can buy a dual sport kit from bajadesigns .com their kit will do what you want . but is a little pricey .I'm making my own wiring harness to make 2007 street legal , but it would be much easier to just buy on and bolt it all up


No, in Portugal (and here in NZ) the WRs come already dual-sported. What 2005eulerr is trying to do is remove all the unnecessary lights and wiring. Unfortunately I don't know how to remove all the wiring but just wanted to clear up what he's actually trying to do :thumbsup:.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • enduroloisir

Posted August 17, 2007 - 08:54 PM

#4

Hi you will find some information at the folowing url. http://www.amis.asso...F-2007,184.html I have do it on my own bike but for the moment I have not enough time to do it...
Eric from France

  • 2005eulerr

Posted August 20, 2007 - 11:32 AM

#5

:applause: According to you, once I saw a switch comand, very small on a KTM, I think it is a better solution, in case of a very tricky removal wires.
My old one wr400f just turns the lights on/off, I would like my new wr450 2007, just do that nothing more... because I could'nt access the carburator because of these cables, on chasis. And I can judge it is for sure these cables that I am talking.
Here in Portugal, yamaha selled two models, one designed for italian, german market, among others, with these complement dual sport( mirrors, turn signals, horn, stop brake lights, min/max headlight, as my bike has. And we have the sportive one, just headlight and tailight, both has license plate and street legal, like my old one.
What's the riscs to follow these cables and to get out, as I said is separated on chasis, sounds like they have put them after the assembly the necessary cables ( sportive one) and after the street legal ( dual sport one).
thanks!

  • RJB

Posted September 03, 2007 - 04:51 AM

#6

Here is a wiring diagram for the 2007 WRF ADR wiring harness. Removal should be very easy if it was done right to start
http://www.blake-wor...-WR450-07-a.jpg




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.