'04 and FMF Q2 revisited


No replies to this topic
  • NM_KDX200

Posted August 15, 2007 - 11:59 AM

#1

Several months ago, I tried an FMF Q2 on my bike and hated it. While the mid-top was good, low end was really boggy and the bike felt like a slug. But since I've been not riding and letting my injured elbow tendons heal, I decided to play with the Q2 a bit and see what I could do. After talking to my (knowledgeable) dealer a bit, I took his suggestion and dropped the needle 2 clips. Bike is now 100% better. In fact, I like it better than stock! I've ridden it 3-4 times now around my slow speed turning practice track and really like the change. It's not as jerky at low RPM and that low end power hit is smoothed out a little- still there, but smoother and slower, almost as if I'd installed a FWW. And that's all it took, lowering the needle. Easy!





Related Content

Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride


Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
Forums
Photo

BIGBORE FOR YZ450F 2006? by Taattie94


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.