RodH, questions about your Hawkins exhaust.



No replies to this topic
  • jj

Posted August 24, 2000 - 07:11 AM

#1

Hey RodH I saw on your profile signature that you run White Brother Hawkins exhaust. 1. What are your power impressions?
2. Are you able to compare the power to stock power?
3. Have you had it dB tested?

A mag recently did an exhaust test for the 426 and if you look at the hp charts the Hawkins with the stock header faired better than most other exhausts. Including Stroker...Interesting!

I've been pondering trying this exhaust with the PowerBomb. Clarke and others seem to think that it helped the power and lower the dB's on the Stroker exhaust. Maybe it would do the same for the Hawkins.

Just my thoughts...

------------------
JJ - 99 WR; WR timed, stock jetting, Scotts stabalizer, Scotts triple clamps, Pro-Tapers, Terry Cable Hot start, MSR Raptor clutch lever, Moose skid plate, Works frame guards, Acerbis Pro Rally guards, Renthal MD-soft grips, Russel speed bleeders, Factory Effect graphics, YZ rear fender




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.