Repacking 2005 yz450f muffler

2 replies to this topic
  • tnl

Posted August 08, 2007 - 03:19 PM


Spent some time recently on the correct way to repack the stock muffler on this forum and found out that the stock core does not come out of the stock muffler or mid pipe. Some of you may say DUH! but it was a question that has been asked in the past that has not been answered. It is welded to the midpipe. Another suggestion was to use stainless steel allen bolts: 1/4"-28(fine thread) 3/8" long for ease of repacking in the future instead of drilling out the rivets but I can't find them anywhere in the Phoenix, AZ area? So it might help those who don't want to waste their time trying to find them even though it sounded like a good idea. I also reused the fiberglass mesh that was wrapped around the core with fresh fmf repacking on the outside. I called 2 Yammi dealers and a parts store in town and neither could tell me about the fiberglass wrap that is around the core and where I could buy more? I was expecting to get a part # from Yamaha but? Also, I hope the high temp RTV I bought is going to withstand the high temps that the pipe puts out? It's rated for 700 degrees. BTW, I got into this because I purchased a Pro Moto Billet end cap with the silent insert so I might as well do the repack job at 55 engine hours?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted August 08, 2007 - 03:36 PM


5TA-1469A-00-00 (1 required)
5TA-1469E-00-00 (2 required)

That was easy. Probably won't find any anywhere, though. They retail for $147 for the set. :smirk:

  • tnl

Posted August 08, 2007 - 04:02 PM


That's a Yami # right? So much for those 2 shops!

Related Content


Snake pit oct 30th by The Anvil

Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies

Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply

First Hare scramble tips by dhend8

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.