06'-07' ODO Head Removal

No replies to this topic

Posted August 08, 2007 - 10:11 AM


So on the WR's with the digital ODO/Enduro comp, in order to remove the "cable" coming up from the front hub you have to remove the entire "head" or pickup that is effectively the RH side spacer and seal..

With old mechanical ODO's you could just un-screw the cable and cap the threaded connection point at the head.

So - I went and got a YZ spacer and new bearings and seals but the WR hub does not provide enuf recessed hub to get the seal to stay in place...

Has anyone done this succesfully with out changing to a YZ hub? And if so, how?



Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.