axle diameters...


3 replies to this topic
  • gbalias

Posted August 03, 2007 - 03:21 PM

#1

whos got their wheels off and will measure (accurately) the diameter of their 426/450 axles?

i know the 1998 400s were 20mm.

i need to know if there is a difference.
thanks guys.

:ride:

i actually think from 99 and up they were the same, but i need to verify.

  • gbalias

Posted August 03, 2007 - 08:26 PM

#2

aww c'mon....no one has a caliper gauge lying around?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 89TRX350RX

Posted December 14, 2007 - 06:05 AM

#3

02 WR426F 22mm axle...

Jamie

  • grayracer513

Posted December 14, 2007 - 06:23 AM

#4

i actually think from 99 and up they were the same, but i need to verify.

You're right. Wheel spacing varies, but the hub and bearings are the same throughout that range.





Related Content

Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

YZ450FX OR YZ450F by MESSMAKER


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  30 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.