Graphics Kits with Clarke 3.3 gal tank

[LarryCO]

Both Factory Effex and One Industries make some pretty sweet graphics kits for the WR. But can someone tell me if they'll work with my Clarke 3.3 gal tank/YZ seat combo? Would I look at WR kits...or YZ kits? Would they look OK on the non-standard Clarke tank?

Also, any other good suppliers of graphics kits would be appreciated.

Thanks!

Larry

[Cobra2go]

I went with the American flag graphics from CEET for a WR on my Clarke tank and it looks ok but not perfect. I called Clarke and they were no help

[MotoGreg]

IMS makes graphics for the oversize YZF tanks.

[Mr_Toyz]

Factory Effex work fine.

Mr T

[MOmilkman]

Larry, I put the One Industries (yellow kit) on my 3.3 Clarke tank.

Here is what the results look like. FYI

[kev426]

what is the white stuff on the grass? never see white stuff on the grass in CA. ?

[MOmilkman]

Originally posted by Rich in Orlando:

Man, that bike looks sharp! Did you powdercoat/paint your frame black? I've been fantasizing about getting mine done. I'd like to get all black graphics, but if I had a second choice it would be yellow.

Rich,

Yes, I sent it to Andrews Powder Coating in California to have it done. If I remember it was about $200. The reason I sent it off instead of having it done locally was because I wanted someone to do it that had expierence with bike frames.

They taped off everything for me and put bolts in all the the threaded areas so I didnt have to chase out the paint. That was nice!!!

I highly recommend them.>>>> Andrews PowderCoating

[ February 28, 2002: Message edited by: MOmilkman ]

[Rich_in_Orlando]

Man, that bike looks sharp! Did you powdercoat/paint your frame black? I've been fantasizing about getting mine done. I'd like to get all black graphics, but if I had a second choice it would be yellow.

[LarryCO]

MOmilkman,

Looks sharp! That's what I wanted to know...

Thanks!

[Cobra2go]

I wanted to add a picture of my bike to this thread and can't seem to figure it out. Could someone please give me some pointers. Thanks

[MOmilkman]

Its real easy Cobra.

1st question: Is the picture you want shown in this thread viewable on the web somewhere already? Website, photopoint, or some other picture hosting service.

That is the first thing you have to do.

After it is uploaded somewhere, right click on the picture and select "properties".

The URL address is what you are looking for. Copy that and we will paste it later.

Now go to you bulliten board you want to post it to. (Thumper-Talk ? )

In your message reply, (directly below where you type in your message when you are replying to someone) click on "Image". A box will appear asking you for your URL. Right click in that box and click "Paste"

Now simply, post your message and it should work