Help! Manual says CR8E, I have a CR8EK?



2 replies to this topic
  • jj

Posted June 24, 2000 - 07:14 AM

#1

CR8E, CR8EK what's the difference. I went to change my plug and realized the plug I have isn't the correct one. Can I use it, what will I gain or loose?
I did notice that the old, correct, CR8E had only one electrode and the CR8EK has two, similar to the split fire...

Thanks!

JJ

[This message has been edited by JJ (edited 06-24-2000).]

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Kevin_in_New_Hampshire

Posted June 24, 2000 - 09:38 PM

#2

JJ,
You are the second person on this websight that has mentioned this. Just an FYI.

  • Bill

Posted June 24, 2000 - 10:38 AM

#3

The "EK" plug is the same heat range as the "E" plug (8). As you stated the only difference is the second ground electrode. I have purchased one and have yet to try it.

Give it a shot and let us know.

Bill




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.