wrench size



4 replies to this topic
  • Paul_Mooney

Posted June 06, 2000 - 05:02 PM

#1

Since I don't have access to my bike right now, can someone tell me the wrench size for the nut on the front axle/ is it 17mm??

Thanks
Paul
99WR400

  • Kevin_in_New_Hampshire

Posted June 06, 2000 - 05:36 PM

#2

Paul,
The hex hole on one side of the front axle is a 17mm. I did not remove the plastic brake line cover on the other side though.
------------------
99 WR, all YZ mods, de-octopused, OEM YZ tank and seat, jetting by Clark.

[This message has been edited by Kevin in New Hampshire (edited 06-07-2000).]

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • JBM

Posted June 07, 2000 - 05:43 AM

#3

On my 426 it is a 22mm.

  • Tim_in_WA

Posted June 07, 2000 - 12:54 PM

#4

Paul,
I went out and measured mine with a cheapo micrometer and got 22mm. I had to place an order today with Baja Designs, and since I've been wanting a rider wrench anyway, asked them if they had one in a 27mm/22mm version for both axles. Sure enough they did ($16.95).

Tim

  • MotoGreg

Posted June 07, 2000 - 04:32 PM

#5

Ya, 22mm which is 7/8"

------------------
'99 WR400
'92 GSXR 7/11
Visit my photo album AT YOUR OWN RISK!! My photo album
Anyone here a sportbike fan also? Then visit us here at www.insanespeed.com




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.