Sherco Enduro Parts Cross Reference

Started by cawooddog, Jul 21 2007 05:55 AM
71 replies to this topic

  • olddirtsurfer

Posted 29 December 2009 - 06:28 PM

#61

I got some replacement fork guards for my 07 from my local bike shop and the brake cable fitting was different to my original. Probably off a later model. The new ones are identical to my X challenge guards. They are made by UFO

So the aftermarket (touratech) brake cable clamp will also fit
Posted Image

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

  • chepstowmark1

Posted 12 March 2010 - 09:59 AM

#62

does any one know if other wheels wil fit an 05 4.5i im thinking of supermoto , thanks mark c

  • olddirtsurfer

Posted 14 June 2010 - 02:39 AM

#63

chepstowmark1 said:

does any one know if other wheels wil fit an 05 4.5i im thinking of supermoto , thanks mark c

Talons are the only ones I know of

  • Robban75

Posted 28 September 2010 - 09:53 AM

#64

freewheel bearing on a 5.1/4.5 are the same as ktm 640 uses but almost half the cost.


758440026000 FREE-WHEEL FWD 332008 BLS

  • beagle scott

Posted 20 October 2010 - 06:13 PM

#65

Hi its time for a new piston ! can anyone tell me if an aftermarket piston has been matched up to fit a 2007 5.1 i None of our parts stores in NZ have a listing ! Thanks for any help !

  • lincius

Posted 30 December 2010 - 01:21 AM

#66

Are there any Cross Reference for rear brake disc SHERCO 5.1 2008?
Thanks Linas

  • magwych

Posted 27 April 2011 - 01:29 AM

#67

Anyone got a steer on the coolant temperature sensor? We are trying to work though a poor start/stalling issue on 3.0 ... Have been through the loom with contact cleaner and dilectric grease; now down to the inputs for the ECU. Suspects are the air temp sensor and coolant temp sensors.

Local dealer looked totally when we asked if he could look at this in his workshop, I suggested he hook it up to the diagnostics computer to check fault codes etc He looked even blanker! Think I am going to have to buy my own VDST unit ...

Meantime, alternatives for the air and coolant sensors would be appreciated. Alfa/FIAT/GasGas perhaps ?

  • shearboy2004

Posted 28 October 2011 - 01:21 PM

#68

This thread has been dying and I'm sure there are more things to add to it ?

I have a small one

Suzuki DR350 S or SE cush drive rear sprockets fit perfectly.

  • magwych

Posted 07 February 2012 - 01:08 PM

#69

View Postmagwych, on 27 April 2011 - 01:29 AM, said:

Anyone got a steer on the coolant temperature sensor? We are trying to work though a poor start/stalling issue on 3.0 ... Have been through the loom with contact cleaner and dilectric grease; now down to the inputs for the ECU. Suspects are the air temp sensor and coolant temp sensors.

Local dealer looked totally when we asked if he could look at this in his workshop, I suggested he hook it up to the diagnostics computer to check fault codes etc He looked even blanker! Think I am going to have to buy my own VDST unit ...

Meantime, alternatives for the air and coolant sensors would be appreciated. Alfa/FIAT/GasGas perhaps ?

Water temperature isa NTC Weber unit part number WTS05, air temperature sensor made by same, part number ATS05. The water temp sensor is common on FIAT Alfa Romeo cars and Ducatis to name but a few. I beleive the ATS is the same.

  • skalim1

Posted 29 February 2012 - 09:55 AM

#70

Piston, rod and roller bearing for Sherco 4.5i 2005? Only original?

  • YHGEORGE

Posted 09 March 2012 - 05:55 PM

#71

Sherco enduro no longer available in the US? Thanks.

  • thillsam

Posted 12 March 2012 - 11:12 AM

#72

View PostYHGEORGE, on 09 March 2012 - 05:55 PM, said:

Sherco enduro no longer available in the US? Thanks.
Nope, not as new imports since after the 2007 model year.



  1. ThumperTalk
  2. → Dirt Bike
  3. → Make / Model Specific
  4. → Exotics
If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!