which jd needle for yz timed wr?


3 replies to this topic
  • Thermos O flask

Posted July 18, 2007 - 03:27 AM

#1

HI,what JD needle do you use for your WR if its YZ timed?
As the instructions say the blue one for WR and the red one for a YZ.
Whats the difference between the needles?

  • bg10459

Posted July 18, 2007 - 06:11 AM

#2

The blue needle is richer than the red. I'm not YZ timed, but I usually use the blue below 50 degrees F from sea level to about 3000'.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Thermos O flask

Posted July 21, 2007 - 07:17 PM

#3

An update on the needles,had the BLUE 3rd clip one in and it was too rich and killed the plug,put in the RED 3rd clip and new plug and hang on!!:eek: starts first kick and never needs the hotstart.

  • SXP

Posted July 21, 2007 - 08:00 PM

#4

An update on the needles,had the BLUE 3rd clip one in and it was too rich and killed the plug,put in the RED 3rd clip and new plug and hang on!!:eek: starts first kick and never needs the hotstart.

What main and pilot are you using?




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.