Yamaha 2004 WR 450


2 replies to this topic
  • wr450senior

Posted July 14, 2007 - 01:00 PM

#1

Hey is there anything special about doing a compression check on my 04 WR 450? All I know is to warm the engine up install the compression tester and hold the throttle wide open while spinning the engine for 3 or 4 seconds. Am I missing anything here? Thanks for your help.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • mcflzwr450f

Posted July 14, 2007 - 02:14 PM

#2

I think you want the reading from the 3rd compression stroke, someone correct me if I'm wrong.

  • txaggie929

Posted July 14, 2007 - 02:28 PM

#3

That's about right, the third or fourth. You don't have to hold the throttle wide open, but you can. Check it both ways for grins.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.