odo drive removal

1 reply to this topic
  • Guest_Guest_*

Posted May 03, 2000 - 07:40 AM


Hi all... I whant to know what parts i need when i remove the odo drive... spacer from a yz, or??

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Bill

Posted May 03, 2000 - 09:24 PM


I have a 99WR and removed the odo drive. I just ordered the YZf spacer and seal and number plate. The seal and spacer bolt right up and the number plate takes a little fabrication. The YZ triple clamp has the bolt hole for the number plate centered and the WR is off set to one side.

I've posted on this subject several times. You may want to search under number plate or odometer.

Good luck and let me know if you need anything else.


86TT225, 98CR80, 99WR, WR timing, throttle stop trimmed, air box lid removed, White Bros head pipe, silencer and air filter. Odometer and headlight removed. Moose hand and mud guards.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.