WR400 Lite Kit wiring Help

No replies to this topic
  • Guest_Guest_*

Posted October 25, 2000 - 10:01 AM


I have a Driven DSC Legalize Dual Sport Kit that was taken off of my 2000 XR400 & Im now trying to Install it to my 99 WR400. The kit is supposed to be able to fit ne bike, yet Im lost as to where I connect the only 2 leads coming from the unit(which appears to be the rectifier/regulator) as I had a harness included with it for the honda-[they plug'd into a pink & yellow wire coming from the stator)...I tried contacting DSC Motosports & they have since lost there dualsport tech...Ne help or shove in the right direction would be appreciated as I'd like to get this thing reg'd...TIA


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.