Jump to content

white bros exhaust


Recommended Posts

Darren, I don't think any of the WB pipes are quiet. The promeg version has a megaphone inlet rather than a straight tube inlet as on the s-bend model. The promeg is more of a top-end pipe than the s model. Dyno test results on a 426 show the promeg ahead of stock in the middle however; not as far ahead as the s bend. Even the s bend was ahead on top. Go figure. See the July 2000 pipeshoot out at www.dirtbikemagazine.com. Good Luck!

Link to comment
Share on other sites

Originally posted by Matt Porritt:

426 doesn't seem to react as greatly to a pipe as the 400s.

But isn’t the stock pipe different between them? This may be a bigger reason why the 400 is perked up more by an aftemarket. I thought 426 had a tapered header but 400 did not. It would be interesting to compare a 426 pipe on a 400 to the stock 400 pipe.

Link to comment
Share on other sites

Originally posted by Hick:

But isn’t the stock pipe different between them? This may be a bigger reason why the 400 is perked up more by an aftemarket. I thought 426 had a tapered header but 400 did not. It would be interesting to compare a 426 pipe on a 400 to the stock 400 pipe.

The 400 and 426 stock pipes are different.

A 426 pipe on a 400 is basically like putting an after market pipe on the 400.

------------------

--

**Ride it like you Stole it!**

Matt Porritt

99 YZ400F

Vist the Rubber Chicken Racing Online Shop

Discounts for ThumperTalk members.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...