FMF pipe came apart



No replies to this topic
  • Dougie

Posted September 25, 2000 - 05:02 AM

#1

While pulling the bike apart getting it ready for Moab, I discovered my FMF PC-IV came apart at the weld of the pipe to the body of the muffler. I mean all the way around it. It had to be from stress as the pipe never really did fit perfectly in there.

Luckily I found someone to weld it back together saving me another $240 on a new one or making me put the stock one back on.

You may want to check that weld if you have a PC-IV or any other aftermarket pipe.

------------------
Dougie, '99 WR400 with a lot of dumb, stupid, here take my money, I have to have them but they don't make me a better rider extra mods.
(Except the dampner :))




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.