Uncorked And She Started Right Up


No replies to this topic
  • kjlong

Posted June 24, 2007 - 07:20 PM

#1

Well, Thanks to the help here and BRP, got the 2007 uncorked with the air box mod along with cutting out the intake restriction. The carb now has 68S pilot and a 175 main, plus the recommended needle jet in the 4th clip. Also has the Uni filter. I did the choke plate mod too. The exhaust got the 2" hole saw treatment. She started right up and seemed to run well. The idle was a little high so I adjusted it to a good idle. It is 10 p.m. and raining so no test ride. Maybe tomorrow.

I still have the Protaper bars and the Scotts top triple clamp and stablizer mount to do along with a Sidewinder set of sprockets and chain, plus a full ProCircuit exhaust to do.

She will get a Factory Connection respring for 220 lbs and the revalve front and back. Thanks for the help.





Related Content

Forums
Photo

Engine Loping/Sputtering by tcaldwell


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 4 replies
Forums
Photo

Fell Off Trailer by usafxr


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies
Wiki
Want to add a kickstart to your XR650L?  Here's how - last post by clc3251

Want to add a kickstart to your XR650L? Here's how


Articles
  • 1 reply
Forums
Photo
Supercross

Supercross Preview 2017 Part 1: Championship Contenders by Chris Cooksey


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  186 replies
Forums
Photo

XR650L super moto wheels by greggkklee


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  29 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.