CRF100 jetting?


1 reply to this topic
  • Terez

Posted June 21, 2007 - 03:28 AM

#1

Hi there

Just bought an 05 CRF100 for my son.
It is very cold blooded and hard to start when cold.

I assume it is the typical factory lean carburetion and corked condition?

Anyone have a dialed in setup for the pilot and main and or airbox/exhaust mods to make it start/run smoother?

I am thinking 1 up on the pilot jet and main and open the airbox lid a bit?
What about shimming the needle?

What can you do to the stock muffler to open it a bit without completely gutting it?

Thanks

  • hornetgod13

Posted June 21, 2007 - 06:50 AM

#2

My son's bike will start on the first or second kick now that I've rejetted it. I removed the screen from the inside of the air filter module, installed a UNI foam filter, cut two large holes in the top of the airbox, and installed a FMF Powercore IV full exhaust. The current bike jetting is 38K pilot, 105K main, fuel screw is 1 1/2 turns out, and the clip is lowered a slot on the needle.





Related Content

Forums
Photo

CRF 80 XR 80 Suspension Rear Shock Fix by WAKTMRider


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • 2 replies
Forums
Photo

'02 XR200 Adventure/Mountain Bike by mx4god


Dirt Bike   Make / Model Specific   Honda   XR/CRF 80-200
  • Hot  28 replies
Forums
Photo

New and I bought a xr100r by 86indy


Dirt Bike   Make / Model Specific   Honda   XR/CRF 80-200
  • Hot  55 replies
Forums
Photo

1986 XR80 From used to brand new restoration. by Jase99


Dirt Bike   Make / Model Specific   Honda   XR/CRF 80-200
  • Hot  30 replies
Forums
Photo

Cylinder boring Question by Sebastien


Dirt Bike   Make / Model Specific   Honda   XR/CRF 80-200
  • 7 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

RegisterSign InClose
If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.